ToolCorral (Home)

Accessories

Air Tools

Books, Videos, & DVD's

Closeouts & Overstocks

Epoxies & Adhesives

Hand Tools

Manufacturers

Metalworking Machinery

Power Tools

WHAT'S NEW!!!!

Woodworking Machinery

WOODWORKING SHOWS

Kreg Pocket Hole Jigs

Tool Storage

Jobsite Security

Nail Guns

Gift Certificates

View Cart

Send to a Friend!

Gift Certificates

Kreg Klamp Table
$399.99
KKS2000
The Ultimate Clamping Solution by Kreg Tool Company! Stop working around your clamps and start working with them. The Klamp Trak allows you to position your Bench Klamp and Klamp Blocks anywhere and everywhere you might need them. Remove them to regain your flat work surface. The Kreg Bench Klamp, with Inter-Lok Technology, is great for almost any woodworking task. It slides across the Klamp Trak, rotates 360 degrees, and locks into place wherever you need it most. The Klamp Blocks allow you to quickly and easily bring your projects into alignment, while at the same time centering your Bench Klamp on the joint line. This helps to ensure a perfectly flush Pocket-Screw joint, every time. The Klamp Table has a durable work surface made from glue-resistant melamine. This large 21" x 33" work surface is perfect for sanding, sawing, drilling, routing, and almost any other woodworking task. The Klamp Table has a rigid foundation. The universal steel stand is the ultimate foundation for the Klamp Table. Adjustable from 31" - 36", this incredibly rigid stand also includes levelers to compensate for your imperfect floor. Add Kreg Heavy-Duty Casters for additional mobility.

Kreg Jig K3 Master System
~~$149.99~~ $139.99 On Sale!
KK3
Kreg Jig® K3 Master System Model #K3MS Drill guide block is now interchangeable between the benchtop and portable bases. The flexibility of two tools in one!

Benchtop base features patent pending front clamping design. Puts the clamp handle on the same side of the workpiece you work on! All the thickness flexibility you need… 1/8” incremental settings for materials from 1/2” to 1-1/2” thick. Patented three drill guide fixed spacing puts pocket holes exactly where you need them for narrow, wide, and widest stock.

Dust collection shroud means no more wood chips on your workbench and extended drill bit life. Material support stop lets you consistently repeat hole spacings.

The Kreg Jig K3 Master System contains: (1) K3 Drill Guide Block, Benchtop Base, Portable Base, Dust Collection Shroud, Material Support Stop, Premium Face Clamp, 3/8” Step Drill Bit (KJD), 6” - #2 Driver Bit, 3” - #2 Driver Bit, Depth Collar, 1/8” Allen Wrench, SPS-C1 screws, SML-F125 screws, SML-C125 screws, SML-C150 screws, SML-C2 screws, SML-C250W screws. Carrying Case and Detailed Instruction Manual.

Dewalt 4-1/2" High Performance Grinder
$139.99
D28114
DeWALT D28114 Heavy - Duty 4-1/2'' High Power Small Angle Grinder The D28114 Features 13.0 Amp/2.3HP, 11,000 rpm DEWALT built G55 (AC) motor designed for faster material removal and higher overload protection. Dust Ejection System™ provides increased durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents. Quick-change wheel release provides tool free wheel removal. Complete Electronic Control™ provides multiple advanced technology features such as E-Clutch™, Power-Off™ and Power Loss Reset™. Dual abrasion protection provides increased motor protection from damaging dust and debris ingestion. One piece brush arm prevents brush hang-up due to dust ingestion. E-Clutch™ shuts the grinder off when a wheel pinch or wheel stall occurs, extending the life of the gears and motor. Power-Off™ overload protection shuts the tool off before it reaches overload or burn-up. Power-Loss Reset™ prevents accidental re-starts following a power disruption when the tool is left in the "on" position. Vibration reducing two position side handle provides user comfort and reduces user felt vibration. Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces. Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage Keyless adjustable guard provides tool free guard adjustments increasing productivity. Specifications Amps 13.0 Amps Max Watts Out 1,700 W No Load Speed 11,000 rpm Use Wheels RPM Above 12,000 rpm Spindle Lock Yes Spindle Thread 5/8"-11 Tool Length 13" Includes 2-position side handle depressed center wheel keyless adjustable guard wrench

4-1/2" / 5" High Performance Grinder w/ Trigger Grip
$109.99
D28115
Features: 13.0 Amp/2.3HP, 9,000 rpm DEWALT built G55 (AC/DC) motor designed for faster material removal and higher overload protection Dust Ejection System™ provides increased durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents Quick-Change wheel release provides tool free wheel removal Dual abrasion protection provides increased motor protection from damaging dust and debris ingestion One piece brush arm prevents brush hang-up due to dust ingestion Vibration reducing two position side handle provides user comfort and reduces user felt vibration Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage Keyless adjustable guard provides tool free guard adjustments increasing productivity Warranty Information Amps 13.0 Amps Max Watts Out 1,700 W No Load Speed 9,000 rpm Use Wheels RPM Above 9,900 rpm Spindle Lock Yes Spindle Thread 5/8"-11 Tool Length 15.25 " Tool Weight 4.75 lbs Includes: 2-position side handle 5" keyless adjustable guard wrench "BUY ONE GET ONE FREE!" limited time only while supplies last!

DEWALT DC022 Heavy-Duty Cordless/Corded Worklight With Dual Port Battery Charger & GFCI Protection
$162.99
DC022
Get more uses out of a DEWALT battery charger. Area light, dual port charger, additional outlets all in one charger! along with a slim design that is easy to fold-up, carry, and store. This charger provides an area light that can be powered by 120V AC Power or by DEWALT 12-18V Batteries. The fluorescent bulb lights the area you are working in with the extreme heat of a halogen light. This is a dual port charger that can charge any DEWALT 7.2V to 18V battery. It charges these batteries in one hour or less. The spring loaded hold-down bars enable you to pack-up and carry the unit with the batteries in the charger without having to worry about the batteries falling out, helping you pack-up at the end of your shift. This charger also has three (3) 15 amp GFCI protected power outlets which provide more versatility and outlets for jobsite power, so you don't have to waste time looking around for other outlets.

Dewalt Heavy-Duty XRP™ 18V Cordless Hammerdrill/Drill/Driver/Circular Saw/Reciprocating Saw/Right Angle Drill/Cut-Off Tool/Flexible Floodlight Combo Kit - DC6KITA
$619.00
DC6KITA
Features: DC988 XRP™ 18V 1/2" hammerdrill/drill/driver with 500 in-lbs of maximum torque and patented 3-speed all metal transmission DC390 XRP™ 18V circular saw with 6-1/2" 16-tooth carbide blade and rip fence can cut 2 X 4's at a 45 degree angle in a single pass DC385 XRP™ 18V cordless reciprocating saw with keyless blade clamp allows for quick blade change without touching blade or reciprocating shaft DW960 18V right angle drill with 310 in.-lbs. of maximum torque DC410 18V cut-off tool with 6,500 rpm provides high power for cutting and grinding applications DW919 18V flexible floodlight provides hands-free use Includes: DC988 XRP™ 18V 1/2" hammerdrill/drill/driver DC390 XRP™ 18V circular saw DC385 XRP™ 18V reciprocating saw DW960 18V right angle drill DC410 18V cut-off tool DW919 18V flexible floodlight 1 hour charger (2) 18V XRP™ batteries 360° side handle 16-tooth carbide tipped circular saw blade circular saw rip fence type 1 and type 27 guards wrench backing flange (1) type 1 and (1) type 27 wheel 3 position side handle contractor bag

Gorilla Glue

Copemaster, Production Coping Machine
$2,295.00
CPM1000
EASY TO USE The Copemaster is a duplicating machine which works like a key copier to cope moulding quickly and accurately. First, a template is made on the machine. This is done by moving the saw carriage in an x and y direction following the mould which is clamped into the vise. The template is now placed in front of the stylus and clamped. As the stylus follows the template the saw blade cuts the cope on the work piece. The copes are easy to duplicate allowing an apprentice to take over, freeing up the master carpenter for other work. The Copemaster is sturdy and easily portable for use in a shop or on a job site. KEY FEATURES • Specially Designed 10” Saw Blade • Work Area Well Guarded and Lit • Carriage Glides on 8 Linear Bearings • Carriage Locks to Allow Plunge or Lateral Cuts • Magnet Holds Carriage Back When Not in Use • Stylus Adjustment to Allow Fine Alignment of Saw Cut • Portable and Light-Approx. 65lbs • Large Capacity-11/4” x 71/2” by Any Length • Capable of Coping Crown, Base, Chairrail, Etc... • Blade Tilts 50° Left and Right, Allowing For L & R Copes and Double Copes • Travel Lock for Transportation • Beveled Vises That Hold Work Securely Down THOROUGH AND IMPECCABLE DESIGN Years in development, the Copemaster offers a unique design which has been subjected to intensive field testing and improvements resulting in a machine which has the user in mind.

Porter Cable Speedmatic® 3 1/4 Peak HP Five-Speed Router
$349.00
PC7518
Model 7518 15 Amps, AC only Electronic five-speed with soft start 10,000, 13,000, 16,000, 19,000, 21,000 RPM Maintains constant speed under load 1/2" collet Auto-release collet system ends "frozen" bits Unique design pus bottom bearing closer to work for minimum bit run-out and vibration Precision machined aluminum motor housing & base 100% sealed ball bearings Standard Equipment: Router motor #75182, base #75361, 1/2" collet #42950, collet wrenches #42596, and operating manual Power 120 VAC, 60 HZ Shipping Weight 18 Lbs. Peak HP 3 1/4 Rated Input Current (Amps) 15 Motor Diameter 4.2" No-Load Speed (RPM) 5 speed with soft-start 10,000, 13,000, 16,000, 19,000 and 21,000 Collets Standard: 1/2" Available: 1/4" & 3/8" Width 11" Base Dia. 7"

SHOP FOX MORTISING MACHINE
The super heavy-duty fence and hold down eliminates unwanted wood movement and "sticking chisels", thus ensuring accurate and fast operation. The unique swiveling base allows easy off the bench operations and opens new possibilities for custom mortises. The precision 1/2" chuck eliminates the need to modify chisels and bits, and the extra capacity allows the use of larger stock. The all-steel quick-adjust depth stop is easy to set and provides a positive stop. Features like a 22" long solid steel quick-positioning handle, 8-tool holder, easy two-door chuck access, large base and twin hardened and ground columns insure perfect mortises every time. SPECIFICATIONS: • Aluminum finned 3/4 H.P. • Adjustable depth stop rod • Unique swiveling base • Hydraulic cylinder for softer releases • Double support columns • Mortise to the center of a 8" wide board • Mortise lumber to 8-3/4" thick • Heavy cast iron construction • Extra long (22") quick set handle • 1/2" Mortise Bit and Chisel is included ** See the bottom of the page for bits and chisels. Approx. Ship. This unit is instock and avilable to ship within 24 hrs. Weight: 95 lbs.

Shop Fox Variable Speed Mini Moulder / Planer
~~$1,299.99~~ $1,099.99 On Sale!
W1739
Description Features: Open sided Mini Planer/Moulder allows profiling of mouldings such as casings with ease. Feed rollers provide consistent performance and easy access knife changing makes this machine a pleasure to own and operate. Choose from a full selection of moulding knives for any profile needed. Includes sturdy work stand with infeed/outfeed rollers and segmented belt for smooth operation. Variable speed control offers added performance for all the toughest hardwoods and stock with figured grain. With a minimum speed of 4.5 feet per minute up to a maximum of 18 feet per minute, you'll have plenty of control for any moulding and planing situation. This is one great machine! Specifications: Motor: 2 HP, 220V, single-phase, 12 amps Planing width: 7" Maximum profile depth: 3/4" Maximum profile width: 6 3/4" Minimum stock length: 9" Minimum stock thickness: 1/4" Maximum stock thickness: 8" Cutterhead speed: 7,000 RPM Height of bed: 31" Overall size: 33"L x 20"W x 45"H Approx. shipping weight: 243 lbs. FREIGHT must be QUOTED!!! Planer knives, stand and 2 HP motor included! ***This unit is in stock and available for immediate shipment***