Woodworking Machinery

The following is just a sample of some of the Woodworking Machines we offer. Please use the above tabs to find the tool category you are searching for. If you are unable to find the exact machine you want, contact us, we might just not have it listed yet.

Dewalt 20" Scroll Saw
Features: Double parallel-link arm design dramatically reduces vibration and noise, for extremely accurate cuts Exclusive tool-free blade clamps allow blade changes in seconds On-off switch, electronic variable speed, flexible dust blower and blade-tensioning lever are all located on the front upper arm for added convenience Arm design pivots from the back of the saw to the front, shortening the arm movement for smoother, quieter operation Arm lifts so blade can be easily threaded through the material for inside cuts Unique arm design keeps the blade perpendicular to the work, dramatically reducing over or under cutting Oversized, cast-iron table provides excellent material support and bevels 45° left and right Warranty Information Amps 1.3 Amps Strokes/Min 400-1,750 spm Stroke Length 3/4 " Depth Of Cut (inches) 2 " Tool Weight 56 lbs Shipping Weight 64.5 lbs Includes: hex wrench blades

Jessem Mast-R-Slide™ 7500 Precision Sliding Cross-Cut Table
$529.99
J07500
Take your table saw to a higher level of precision and performance with the New Mast-R-Slide™ Sliding Cross-Cut Table from JessEm Tool Company. This fine quality table saw system features a network of beautifully engineered aluminum extrusions, steel guide rails and precision bearings designed to create the ultimate cross-cutting solution. Designed to replace the left extension wing on most American style cabinet saws and contractor saws, this accessory bolts easily onto the saw with a quick, no-hassle setup. The Mast-R-Slide™ system features JessEm’s innovative Posi-Trak™ bearing guided multi-rail system for an exceptionally smooth and accurate glide from one end of the travel range to the other. The guide mechanism is comprised of 30 double-sealed precision bearings positioned in a staggered design to provide constant contact to the guide rails throughout its travel. The sliding table is easily adjustable to level with the saw’s tabletop and to align it parallel to the cutting blade. Also included is an outrigger support table that is fully adjustable for positioning in a fixed location anywhere along the length of the sliding table as determined by the cutting operation being performed. The extruded aluminum fence length is 28 inches closed and extends outward for a maximum measured cut length of 48 inches with the flip-stop. The fence offers mitered cross-cuts up to 45 degrees in both directions. The Mast-R-Slide™ sliding table offers three positions for the fence, two front end positions (one optimal location for mitered crosscuts and another allowing for an increased cutting width at 90 degrees) and a rear end position for a maximum cross-cut capacity of 36 inches. The fence is easily moved from one position to the other and quickly removes from the sliding table for unobstructed use of the table saw while utilizing the rip fence. The Mast-R-Slide™ 7500 was designed so that no support legs are required, offering a smaller footprint and allowing the optional use of a mobile base on the saw. The Mast-R-Slide™ 7500 will fit right or left-tilt table saws and is designed to be used on the left side of the saw. The table saw must have a solid cast iron top. Table saws with a four-hole extension wing mounting pattern require drilling two additional holes. Product Specifications- Maximum stroke: 37" Length of cut off fence: 28” extends to 48” Length of rail system: 27” Sliding Table Dimensions: 7-7/8” x 40” Outrigger Table Dimensions: 8-1/2” x 8-1/2” Sliding Table Width including Outrigger: 16-3/8” Maximum Cross Cut (w/fence in front position): 33” Maximum Cross Cut (w/fence in middle position): 24-1/2” Maximum Cross Cut (w/fence in rear position): 36” Unit Weight: 48 lbs Note: The position of the saw blade varies from saw to saw and slightly affects the maximum cross-cut capacity. A sliding table allows you to cross cut larger panels than a miter gauge or cross-cut sled and provides a safer and more stable means of supporting the work-piece through the cut.

Porter Cable 12" Deluxe Dovetail Jig
$169.99
PC4212
Model 4212 Handles stock 1/4" to 1 1/8" thick Patented alignment lines and router bit depth stop allow for quick, easy set-up Heavy-duty cam-type clamps with sandpaper-backed locking bars provide solid grip of wood CNC machined aluminum templets provide superior accuracy Cuts through dovetails, box joints, half-blind dovetails, rabbeted half-blind dovetails, and dovetail dadoes Additional templet available to create miniature dovetails Standard Equipment: Dovetail jig, through dovetail/box joint combo templet #4213, half-blind/dado combo templet #4211, 1/2" shank carbide-tipped dovetail bit #43776PC, 1/2" shank carbide-tipped straight bit #43743PC, templet guide #42040, templet guide #42047, two lock nuts #42237 and operating manual Base 1/8" Stamped Steel Clamps Cam-Action 3/4" Steel Max. Stock Width 12" Max. Stock Thickness 1 1/8" Standard Templet Half-Blind/Dado Combo Templet & Through Dovetail/Box Joint Combo Templet Shipping Dimensions Length: 22.87" Width: 12.37" Height: 11.37" Shipping Weight 25 lbs.

Shop Fox 2HP Shaper
ShopFox designed this Shaper for maximum performance at an affordable cost. With 25% more power and 40% more weight than other shapers in its price range, this Shaper offers the best value on the market! Specifications: Motor: 2 H.P., 110/220V, Single-Phase Spindles: 1/2" and 3/4" (Included) Spindle Travel: 3" Table Size: 24" Wide x 21" Deep Stand: Cabinet Style, Powder Coated Paint Power Cord Size: 10' x 14 Gauge Heavy-Duty Miter Gauge Large Precision Ground Cast Iron Table Powder Coated Paint All Ball Bearing Construction Approx. Shipping Weight: 270 lbs. ** Please e mail for freight quote**

Copemaster, Production Coping Machine
$2,295.00
CPM1000
EASY TO USE The Copemaster is a duplicating machine which works like a key copier to cope moulding quickly and accurately. First, a template is made on the machine. This is done by moving the saw carriage in an x and y direction following the mould which is clamped into the vise. The template is now placed in front of the stylus and clamped. As the stylus follows the template the saw blade cuts the cope on the work piece. The copes are easy to duplicate allowing an apprentice to take over, freeing up the master carpenter for other work. The Copemaster is sturdy and easily portable for use in a shop or on a job site. KEY FEATURES • Specially Designed 10” Saw Blade • Work Area Well Guarded and Lit • Carriage Glides on 8 Linear Bearings • Carriage Locks to Allow Plunge or Lateral Cuts • Magnet Holds Carriage Back When Not in Use • Stylus Adjustment to Allow Fine Alignment of Saw Cut • Portable and Light-Approx. 65lbs • Large Capacity-11/4” x 71/2” by Any Length • Capable of Coping Crown, Base, Chairrail, Etc... • Blade Tilts 50° Left and Right, Allowing For L & R Copes and Double Copes • Travel Lock for Transportation • Beveled Vises That Hold Work Securely Down THOROUGH AND IMPECCABLE DESIGN Years in development, the Copemaster offers a unique design which has been subjected to intensive field testing and improvements resulting in a machine which has the user in mind.

Fein Multimaster Top Kit
$399.99
2198976
FEIN MultiMaster Top with tool-free QuickIN rapid clamping system in a tool case, including a broad range of accessories for nearly limitless applications. In the lead through oscillation technology: unsurpassed versatility. Convenient accessories exchange without keys using the QuickIN rapid clamping system. Powerful 250 Watt motor with electronic speed control. Chuck with form-fitting mount provides high torque transfer. Integrated interface for adaptation of additional system accessories. Comprehensive accessories range available. 1 FEIN MultiMaster FMM 250 Q, 1 sanding pad, 5 of each type of sanding sheet, grain 60, 80, 120 and 180, 1 universal E-CUT saw blade (29mm), 1 HSS segment saw blade, 1 Carbide-tipped segment saw blade, 1 rigid stopping knife, 1 Profile sanding set, 1 dust extraction device, 1 sanding pad, perforated, 5 of each type of sanding sheet, grain 60, 80, 120 and 180, perforated, 1 carbide rasp (triangular), perforated, 1 plastic carrying case

W1812 - SHOP FOX® Planer Molder with Stand
$1,326.99
W1812
Patented, Patents Pending Motor: 2HP, 220V, single-phase, TEFC, 3450 RPM Amps: 12 Power transfer: V-belt Overall dimensions: 36-1/4"L x 22"W x 34-1/2"H Maximum planing width: 7" Maximum planing depth: 1/8" Maximum planing height: 7-1/2" Maximum profile width: 6-3/4" Maximum profile depth: 3/4" Minimum stock thickness: 1/4" Minimum stock length: 9" 2 HSS knives 7-1/8"L x 1-1/2"W x 1/4"T Number of cuts per minute: 14,000 Number of cuts per inch: 64-260 Cutterhead type: square Cutterhead diameter: 1-1/4" Cutterhead speed: 7000 PRM Table dimensions: 14-1/8"L x 10"W x 7/16"T Extension wing dimensions: 11"L x 8-9/16"W x 2-3/8"T Floor to table height: 30-3/8" Dust port: 4" (1) Feed speed: 0 - 18 FPM Precision-ground cast iron infeed and outfeed extension wings Dovetailed way for cutterhead housing with precision gib adjustments Pedestal-mounted control switch with variable speed control Power feed motor: 1/4 HP, 180VDC, 1.5A Power feed motor speed: 0-55 RPM Variable speed power feed with chain drive power transfer