SHOP FOX MORTISING MACHINE
The super heavy-duty fence and hold down eliminates unwanted wood movement and "sticking chisels", thus ensuring accurate and fast operation. The unique swiveling base allows easy off the bench operations and opens new possibilities for custom mortises. The precision 1/2" chuck eliminates the need to modify chisels and bits, and the extra capacity allows the use of larger stock. The all-steel quick-adjust depth stop is easy to set and provides a positive stop. Features like a 22" long solid steel quick-positioning handle, 8-tool holder, easy two-door chuck access, large base and twin hardened and ground columns insure perfect mortises every time.
SPECIFICATIONS:
• Aluminum finned 3/4 H.P. • Adjustable depth stop rod
• Unique swiveling base • Hydraulic cylinder for softer releases
• Double support columns • Mortise to the center of a 8" wide board
• Mortise lumber to 8-3/4" thick • Heavy cast iron construction
• Extra long (22") quick set handle • 1/2" Mortise Bit and Chisel is included ** See the bottom of the page for bits and chisels. Approx. Ship. Weight: 110 lbs.
|
Shop Fox 2 HP Dust Collector
A powerful new dust collector from SHOP FOX®! This unit features an extra Heavy-Duty 12" steel impeller and a 2 H.P. motor that runs on 220V.
SPECIFICATIONS:
Motor Size: 2 H.P., prewired to 220V, single phase, 3450 RPM
Motor Amp Draw: 9 Amps (220V)
6" inlet with a removable "Y" fitting with two 4" openings
Portable Base Size: 21-1/2" x 33-1/2"
Bag Volume: 5.4 Cubic Feet
Height (With bags inflated): 78"
Bag Size (Dia. x depth): 19" x 33" (2)
Powder coated paint
Impeller: Balanced Steel, Radial Fin 12"
Air Suction Capacity: Approx. 1550 CFM
Static Pressure: 12.3"
Standard Bag Filtration: 30 Micron
|
Shop Fox 14" Bandsaw
We have taken the most popular bandsaw size and added many features only found on much larger and more expensive machines. Features such as extruded aluminum fence and rails, miter gauge, upper and lower ball-bearing blade guides, enclosed cabinet stand, hinged wheel covers, 4" dust port and powerful 1 HP motor are all standard. And, with its cast-iron frame and table, this bandsaw will be a reliable shop fixture for many years to come.
SPECIFICATIONS:
Motor: 1 HP, TEFC, 110V / 220V single phase, 1,725 RPM
Amps: 10/5
Blade size: 93-1/2" (1/8" to 3/4" wide)
Table size: 14" x 14" x 1-1/2"
Table height above floor: 43-5/16"
Cutting capacity (throat): 13-1/2"
Maximum cutting height: 6", 12" with extension kit (not included)
Table tilt: 45° right, 10° left
Blade speeds: 1,700 & 3,000 FPM
Frame construction: Cast-iron
Precision ground cast-iron table
Cast-iron wheels
Deluxe extruded aluminum fence
Ball-bearing blade guides
Footprint: 17-1/2"W x 15-1/8"D
Approximate shipping weight: 256 lbs.
FEATURES:
Cabinet type stand (full storage)
Upper and lower ball-bearing blade guides
All ball-bearing construction
4" dust port
Includes one 3/8" blade, fence and miter gauge
Fence scale with magnifying window
Quick-change blade release/tensioning
|
|
Shop Fox Oscillating Drill Press
SHOP FOX W1668 13-1/4" Oscillating Drill Press
This SHOP FOX machine serves as both a regular Drill Presse and an Oscillating Spindle Sander. This patented dual-purpose machine comes supplied with an oversize hole and reducer rings to match different sanding drums. Just connect to a utility vacuum and sand away.****For a limited time all #W1668 Oscillatting Drill Presses will come with a #D2677 Drum Sander Set FREE!!!!!! ****
SPECIFICATIONS:
Motor: 3/4 H.P. 110V, 1725 R.P.M.
Overall height: 38"
Spindle travel: 3-1/4"
Swing: 13-1/4"
Drill chuck: 5/8"
Dust port size: 2-1/4"
12 speeds: 250-3050 R.P.M.
Table: Round 12-3/8" Dia.
Table swing: 360 degrees
|
Shop Fox 5 hp 20" Planer
Shop Fox 20" Surface Planer
This workhorse has all the features anyone would need in an industrial grade planer. With a large 20" capacity and a heavy duty construction this machine is the last planer you should ever need. 4 Blade cutterhead features redesigned blade angle to reduce tear-out in figured woods.
Specifications: 5 HP Single Phase 220v Motor
5500 RPM cutterhead speed, 20" maximum cutting width, 8-5/8" max cutting height, 1/8" max depth of cut, 25-3/4" x 20" Table, 4 HSS Knives, Heavy duty Cast Iron Construction, 2 speed Automatic feed Rate ( 16 & 20 FPM), 3 Chromed Infeed & Outfeed rollers, anti kickback design, 2 YEAR WARRANTY **Please email your zipcode for freight quote**
|
Shop Fox 6" x 10" Combination Sander
Shop Fox 6" x 10" Combination Sander.
This combination 6" x 48" belt and 10" disk Sander is a powerful industrial quality machine offering performance second to none. A powerful 1 hp motor offers plenty of torque for all sanding operations and the heavy duty cast iron construction provides the weight needed to keep vibration in check. Add to this a full storage cabinet stand, superior dust collection design, and a powder coat paint finish and you have a high performance machine, at a fantastic price. Specifications: 1 HP 110/220 v Single Phase 3450 RPM Motor. 6" x 48" Belt Size, 10" Disc, Quick Change Belt release, 2300 FPM belt speed, Heavy duty miter Gauge & dust port. 2 YEAR WARRANTY
Email your zipcode for a freight quote**
|
|
|
Shop Fox 2HP Shaper
ShopFox designed this Shaper for maximum performance at an affordable cost. With 25% more power and 40% more weight than other shapers in its price range, this Shaper offers the best value on the market!
Specifications:
Motor: 2 H.P., 110/220V, Single-Phase
Spindles: 1/2" and 3/4" (Included)
Spindle Travel: 3"
Table Size: 24" Wide x 21" Deep
Stand: Cabinet Style, Powder Coated Paint
Power Cord Size: 10' x 14 Gauge
Heavy-Duty Miter Gauge
Large Precision Ground Cast Iron Table
Powder Coated Paint
All Ball Bearing Construction
Approx. Shipping Weight: 270 lbs.
** Please e mail for freight quote**
|
Shop Fox 3 H.P. Dust Collector
When you are ready to take your dust collection to the next level, this new 3 HP Dust Collector will be your first choice. The increase air suction capacity will allow you to bigger and more complex dust collection systems with room to spare. Also,the double collection setup means less down time emptying bags and shaking out the filters - this translates in more time actually making the dust.
Features 3 hp 220v, single phase , 3450 RPM motor. 18amp draw @ 220 volts, 13" balanced steel radial fin impeller, 8" maximum inlet, includes 4 way - 4' inlet adapter, Air suction cap,: 2,800 CFM, Static Pressure: 17.2 (4) 1"30 Micron Bags, 78" Tall w/ bags inflated, Bag volume 10.8 Cubic Feet. This unit weighs over 150 lbs and needs to be shipped via truck, freight will be quoted at time of order.
|
Shop Fox 1-1/2 hp Dust Collector
1-1/2 H.P. Dust Collector
A powerful new dust collector from Shop Fox®! This unit features an extra Heavy-Duty 12" steel impeller and a 1-1/2 H.P. motor that runs on 110V.
SPECIFICATIONS:
• Motor Size: 1-1/2 H.P., prewired to 110V, Single-Pphase, 3450 RPM
• Motor Amp Draw: 110V - 14A
• Portable Base Size: 21-1/2" x 33-1/2"
• Bag Volume: 5.4 Cubic Feet • Height (With bags inflated): 78"
• Bag Size (Dia. x depth): 19" x 33" (2) • Powder coated paint
• Air Suction Capacity: 1280 CFM • Static Pressure: 10.1" • Standard Bag Filtration: 30 Micron
• Approx. Shipping Weight: 120 lbs.
|
|
|
Shop Fox 8" Jointer
Built like a tank, yet refined and precise, the W1684 8' Jointer is designed to handle your extra long boards with accuracy and ease. Never before has the woodworking world seen such a blend of design and style. Features include a +/- 90 deg to +/- 45deg Tilting fence, silky smooth handwheel table adjustments, a safe and reliable pedestal mounted power switch, precision ground cast iron table and super durable powder coated paint. For the best that money can buy look no further than the W1684.
2HP 220v Single Phase 3450 RPM Motor. Table Size 9-1/4" x 70". Overall Depth 27-1/2". height to table = 31-1/4". 3" diameter cutterhead. 3- 8" x 1" x 1/8" Knives. 1/2" Rabbet capacity. Max. width of cut = 8", cutterhead speed 5500RPM, Cuts per minute = 16,500. 4" Dust chute. 2 Year Warranty.
** Please email your zipcode for a freight quote**
|
|
|
|
|
|
Shop Fox 15" Deluxe 3hp Close Stand Planer
The most popular planer size is now offered with all of the features woodworkers demand including a one-piece stand, pedestal mounted magnetic switch control, top mounted return rollers, 4 column support, extension beds and rollers, adjustable bed rollers, large handwheel, two speed gear box and triple belt drive. This is the Planer woodworkers dream about. specifications: 3HP, 220v single Phase, 18 amp Motor. Table size w/extensions 15-5/8" x 14". Foot Print = 21-1/2" x 21", Overall Width = 32" Height = 42", 3 HSS Knives, 5000RPM Cutterhead Speed, Maximum depth of Cut = 1/8" Maximum Width of Cut=14-7/8" , Maximum Height of Cut=6-1/8", 15,000 cuts per minute. with a variable feed rate of 16 or 20 Feet per Minute. Maximum 78 cuts per minute.Includes Jack Screw and Spring Loaded Knife Setting Kit. This unit is available for immediate ship!
|
Shop Fox 20" Spiralhead 5hp Planer
W1718 - 5 HP 20" Spiral Cutterhead Planer
Prepare yourself for the heavyweight champion of planers! This workhorse has all the features anyone would need, plus a few extra for ease of use. Constant wood contact with the blades on this spiral cutterhead planer produces a surface that is unsurpassed and very nearly ready for finishing. An additional benefit of the spiral cutterhead is its amazingly quiet operating volume. With a large 20" capacity and rugged construction, this machine is the last planer you should ever need.
SPECIFICATIONS:
Motor: 5 HP, single-phase, 220V, 28 Amps
Cutterhead speed: 5,500 RPM
Cutting width: 20"
Cutting height: 8"
Max. depth of cut: 1/8"
Table size: 25-3/4" x 20"
Cutterhead diameter: 3-3/16"
Knives: 4 rows, spiral knife configuration, total of 90 knives
Dust port: 5"
Footprint: 27-1/2" wide x 22-1/2" deep
Approx. shipping weight: 778 lbs.
FEATURES:
Smooth cutting spiral cutterhead
Heavy-duty cast iron construction
Powerful 5 HP TEFC motor
Permanently lubricated & shielded bearings
3 Chromed infeed and outfeed rollers
Anti-kickback design
Heavy cast iron balanced handwheel
Precision ground table for accuracy
Magnetic safety switch
Rubber outfeed roller
Powder coated paint
2 Chromed upper rollers
Feed rates: 18 & 23 FPM
|
|
|
|
|
|
Small Push Block
Our push blocks are constructed of high-impact molded plastic with natural rubber friction pads that grip the workpiece firmly. Woodworkers can work with confidence knowing that these blocks are between their fingers and the cutting tool. Bright, safety-orange color makes them easy to find and reminds woodworkers that safety comes first!
|
Shop Fox 8" Spiral Cutterhead Jointer
W1705 - 8" Jointer with Spiral Cutterhead
These Shop Fox® 8" Jointers are high on everyone's wish list and offer rugged cast iron construction, large capacity for precision edges on long boards, magnetic switches and durable center-mounted, fully adjustable 90° to ±45° tilting fence. Other features include silky-smooth handwheel table adjustments, a safe and reliable pedestal mounted power switch, precision-ground cast iron tables and super durable powder coated paint. Choose between the W1684 with standard 3-knife cutterhead or the W1705 with spiral cutterhead and indexable carbide inserts for ultra-smooth finishes.
SPECIFICATIONS:
Motor: 2 HP, 220V, single-phase, TEFC capacitor start induction, 3,450 RPM
Amps: 14
Table size: 9-1/4" x 70"
Overall length: 70"
Overall depth: 27-1/2"
Height to table: 31-1/4"
Fence size: 39-9/16" x 4-7/8"
Foot print: 23-1/2" x 19"
Cutterhead diameter: 3"
Knives (W1684): 3 - 8" x 1" x 1/8"
Knives (W1705): 40 - 4 sided indexable carbide inserts
Rabbeting capacity: 1/2"
Max. width of cut: 8"
Cutterhead speed: 5,500 RPM
Cuts per minute (W1684): 16,500
Cuts per minute (W1705): 22,000
Fence tilt: 45° L, 90°, 45° R
Approx. shipping weight: 495 lbs.
FEATURES:
Precision ground fence and tables
Center mounted fence
5" Handwheels
Rabbeting ledge
Dust chute
Oversized welded steel stand
Post mounted control switch
Dual V-belt drive
Shielded & lubricated ball bearings
Magnetic w/ thermal overload protection switch
|
|
Shop Fox 26" Wide Drum Sander
W1678 - Drum Sander
Whether quickly surface sanding large quantities of panel assemblies, or achieving "tear-out" free finishes on figured wood, the Model W1678 efficiently performs a function no other machine can fulfill! At a full 26" wide, the dual drum sander can be fitted with two different grits allowing both rough and finish sanding to be performed in one pass. When you are ready to spend less time sanding and more time building, push aside your old hand sanders and make room for the Model W1678.
SPECIFICATIONS:
Motor size: 5 HP, 220V, single-phase
Capacity: 4-1/4" thick by 26" wide
Conveyor speed: Variable (0-20 FPM)
Conveyor motor: 1/4 HP
Switch: Magnetic
Dual drum with hook and loop sandpaper attachment
Stand: Cabinet style
Power cord size: 10' x 12 AWG
Powder-coated paint
Minimum board length: 9"
Minimum board thickness: 1/8"
Conveyor Table size: 26-1/8" x 30-1/4"
Surface speed of drums: 2,300 FPM
Dual dust ports and ball-bearing construction
Two 6" x 27-3/4" aluminum drums
Amp meter to indicate load
Hinged hood
Micro-adjustable rear drum
Uses hook & loop sandpaper
Shipping weight: 495 lbs.
|
Shop Fox 20" Wide-Belt Sander with Digital Readout
W1709 - 20" Wide-Belt Sander with Digital Readout
This compact Wide-Belt Sander has digital controls and readout for setting your sanding depth automatically. You can easily and very accurately sand flat boards up to 20" wide resulting in a very smooth and flat finish. Other features include independent motor controls, quick-change belt system with automatic belt tensioning, motorized table elevation control, adjustable photo-electric belt oscillation system, sanding load meter, safety shut-off bar, and a built-in air regulator and filter, as well as an emergency disc brake.
SPECIFICATIONS:
Sanding motor: 7-1/2 HP, 220V, single-phase
Sanding motor speed: 1,725 RPM
Feed motor: 1/2 HP, 220V, single-phase
Feed motor speed: 1,725 RPM
Elevation motor: 1/3 HP, 220V, single-phase
Elevation motor speed: 1,725 RPM
Drum speed: 3,550 FPM
Drum diameter: 7-13/16"
Feed rates: 16.4, 23, 32.8 FPM
Maximum sanding width: 20"
Maximum sanding thickness: 6"
Minimum stock length: 9"
Minimum stock thickness: 1/8"
Belt size: 20-1/2" x 48"
Required air pressure: 57 PSI
Dust port: 4"
Footprint: 31-1/4" wide x 16-1/2" deep
Height with dust port: 60-1/4"
Approx. shipping weight: 961 lbs.
|
Shop Fox 24" Wide-Belt Sander with Digital Readout
W1710 - 24" Wide-Belt Sander with Digital Readout
Numeric control pad and digital readout provide the ultimate in precision and ease-of-use required by professional woodworking shops. Combined with a powerful 10 HP motor, variable feed rate, 24" wide capacity and perfect results every time, this Wide-Belt Sander utilizes single-phase power for shops where three-phase power is unavailable. Other features include independent motor controls, quick-change belt system with automatic belt tensioning, air-controlled automatic belt tracking system, motorized table height, adjustable and air controlled belt oscillation, load meter, safety shut-off bar, built-in air regulator and filter, dust ports and emergency disc brake.
SPECIFICATIONS:
Sanding motor: 10 HP, 220V, single-phase
Sanding motor speed: 1,725 RPM
Feed motor: 1 HP, 220V, single-phase
Feed motor speed: 1,725 RPM
Elevation motor: 1/3 HP, 220V, single-phase
Elevation motor speed: 1,725 RPM
Drum speed: 3,550 FPM
Drum diameter: 7-7/8"
Feed rates: 14-3/4 - 49 FPM
Maximum sanding width: 24"
Maximum sanding thickness: 6"
Minimum stock length: 10"
Minimum stock thickness: 1/8"
Belt size: 25" x 60"
Required air pressure: 57 PSI
Dust port: two 4"
Footprint: 39-1/4" wide x 19-1/4" deep
Height with dust ports: 71"
Approx. shipping weight: 1,650 lbs.
|
|
Shop Fox 12" Benchtop Drum Sander
Finally get the even sanding performance only a self feeding drum sander can provide in a smaller shop sized unit. The 12" width and 3-3/4" thickness capacity handles most of the stock produced in any shop, which makes it the ideal machine for removing telltale surface planer marks. Accepts hook and loop sanding rolls for easy installation and grit changes.
Specifications: Sanding motor: 1-1/2hp, 18 amp. 110v, single phase.
Conveyor motor, 1/10hp, single phase 110 volt Var speed 0-15 FPM.
Drum Surface Speed: 2,300 FPM
Maximum stock dimensions: 12" wide x 3-3/4" thick.
Minimum stock length: 8"
Sanding Drum size: 4"
Sanding Belt size: 3" x 72" hook & loop,
dust collection port: 2-1/2"
Footprint: 13-1/2" deep x 22-1/4" wide
Shipping weight = 200 lbs
|
|
Shop Fox 12" Heavy duty Jointer w/ Parralelogram Adjustable Beds
This large capacity Jointer, with its big cast iron fence, 83" long table and 12" cutting width make edge jointing and flattening wide stock a breeze. its parrallelogram table adjustment mechanism guarantees tables stay perfectly aligned to each other throughout their vertical range and a half ton of cast iron mass dampens any motor vibration for perfect results every time.
Motor = 3hp 220v single phase 18A, 3450 RPM
Switch = magnetic w/ thermal overload protection
Table Size = 13" x 83"
Table = Precision Ground Cast Iron
Deluxe cast iron fence size = 47" L x 1 1/4" W x 5 3/8" H
Cutterhead diameter = 3 3/4"
Cutterhead Knives = 4 (HSS) 12" x 1 9/16" x 1/8"
Cuts per minute = 19,800
Cutterhead speed = 4,950 RPM
Max. Depth of cut = 1/8"
Max Rabbetting depth = 3/4"
Max width of cut = 12"
Must ship via truck, delivery charge needs to be quoted.
|
|
